• 品       牌：TI(德州仪器)
• 型       号： TPIC6B595DWR
  点击复制
• 商品编号： G0024934
  点击复制
• 封装规格： 20-SOIC
  点击复制
• 商品描述： The TPIC6B595 device is a monolithic, high-voltage, medium-current power 8-bit shift register designed for use in systems that require relatively high load power. The device contains a built-in voltage clamp on the outputs for inductive transient protection. Power driver applications include relays, solenoids, and other medium current or high-voltage loads.; This device contains an 8-bit serial-in, parallel-out shift register that feeds an 8-bit D-type storage register. Data transfers through the shift and storage registers on the rising edge of the shift-register clock (SRCK) and the register clock (RCK), respectively.; The storage register transfers data to the output buffer when shift-register clear (; ) is high. When; is low, the input shift register is cleared. When output enable (; ) is held high, all data in the output buffers is held low and all drain outputs are off. When; is held low, data from the storage register is transparent to the output buffers. When data in the output buffers is low, the DMOS-transistor outputs are off. When data is high, the DMOS transistor outputs have sink-current capability. The serial output (SER OUT) allows for cascading of the data from the shift register to additional devices.; Outputs are low-side, open-drain DMOS transistors with output ratings of 50 V and 150-mA continuous sink-current capability. Each output provides a 500-mA typical current limit at T; = 25°C. The current limit decreases as the junction temperature increases for additional device protection.; The TPIC6B595 is characterized for operation over the operating case temperature range of −40°C to 125°C. The TPIC6B595 device is a monolithic, high-voltage, medium-current power 8-bit shift register designed for use in systems that require relatively high load power. The device contains a built-in voltage clamp on the outputs for inductive transient protection. Power driver applications include relays, solenoids, and other medium current or high-voltage loads.; This device contains an 8-bit serial-in, parallel-out shift register that feeds an 8-bit D-type storage register. Data transfers through the shift and storage registers on the rising edge of the shift-register clock (SRCK) and the register clock (RCK), respectively.; The storage register transfers data to the output buffer when shift-register clear (; ) is high. When; is low, the input shift register is cleared. When output enable (; ) is held high, all data in the output buffers is held low and all drain outputs are off. When; is held low, data from the storage register is transparent to the output buffers. When data in the output buffers is low, the DMOS-transistor outputs are off. When data is high, the DMOS transistor outputs have sink-current capability. The serial output (SER OUT) allows for cascading of the data from the shift register to additional devices.; Outputs are low-side, open-drain DMOS transistors with output ratings of 50 V and 150-mA continuous sink-current capability. Each output provides a 500-mA typical current limit at T; = 25°C. The current limit decreases as the junction temperature increases for additional device protection.; The TPIC6B595 is characterized for operation over the operating case temperature range of −40°C to 125°C.